NICE DPRO924 Control Unit

Description

Exact product name available on branded site: DPRO924 (officially listed as a control unit / central control unit)

DPRO924

Slug: nice-dpro924-control-unit

Product Description

The Nice DPRO924 is a central control unit designed for 24V sectional balanced doors using Nice Sumo-family motors. It works as the electronic management board of the automation system, handling motor power, command inputs, safety devices, programmable outputs, and operating logic from one enclosure. This makes it a critical replacement part when a damaged board causes unreliable movement, lost safety response, or interrupted automation cycles. For buyers in Abu Dhabi, DPRO924 is the correct original solution for restoring stable sectional door control, accurate setup, and consistent daily performance in compatible installations.

Key Features and Technical Specifications

• Official type: central control unit
• Control unit category
• For 24V sectional balanced doors
• Compatible with Nice Sumo-family motors
• 230V~ 50/60Hz supply
• Maximum absorbed power: 500W
• Insulation class 1
• Emergency supply via PS224 accessory
• Service output: 24V, 200mA
• Phototest output: 24V, 200mA
• STOP input for 8.2 Ω edge or OSE
• ALT input for NC safety circuit
• SbS input, programmable with Oview
• Open input, programmable with Oview
• Close input, programmable with Oview
• Photo input for NC photocells
• Photo2 input for NC photocells
• SM connector for plug-in receivers
• Compatible with SMXI, OXI, OXIBD receivers
• IBT4N coupling for Oview or IT4WiFi
• Partial opening function
• Automatic closing mode
• Semi-automatic mode
• Industrial mode
• Sensitivity adjustment support
• Encoder or electromechanical limit switch setup
• OUT1 flasher output
• OUT2 clean contact relay output
• OUT3 clean contact relay output
• IP55 protection class
• Operating temperature: -20°C to +55°C
• Dimensions: 310 x 210 x 125 mm

Main Benefits for the Customer

• Restores stable sectional door control
• Supports reliable command processing
• Integrates safety devices correctly
• Helps replace failed original electronics
• Supports accessory expansion
• Improves operating consistency
• Enables accurate programming
• Maintains original-system compatibility

Use Cases

• Residential sectional garage doors
• Commercial sectional door systems
• Replacement of a damaged control unit
• Repair of unstable door automation
• Upgrade of older compatible Nice setups
• Safety-focused automation servicing

Compatibility and Installation Notes

• Only for sectional balanced doors
• Only for Nice Sumo-family motors
• Not confirmed for Spin or SpyKit systems
• Supports NC photocells and safety inputs
• Supports 8.2 Ω edge or OSE input
• Supports plug-in SM radio receivers
• Requires 230V~ 50/60Hz mains supply
• Suitable for encoder or limit-switch motor setup
• Installation by a qualified technician is recommended
• Programming and learning are required after replacement

For official installation details, review the technical manual.

Packing Includes

Restore Reliable Door Control

Call/WhatsApp: +971 54 482 5472 for the correct Nice replacement control unit in Abu Dhabi.

Nice DPRO924 central control unit for 24V sectional balanced doors with Sumo-family motors, 230V supply, SM receiver coupling, IP55 housing, and programmable safety control.

Total Number of Words: 428