CAME KIARO KLED

Description

Here’s the verified version, cleaned up for Abu Dhabi and based on CAME’s official product pages and installation manual, because manufacturers do occasionally hide the useful bits under three layers of brochures.

Exact Product Name on Official Website

The official CAME product listing identifies this model as 001KLED in the KIARO range, with the product designation KLED and the description LED flashing light signaller. That is the most accurate branded naming to use for your product page. The draft phrase “CAME KIARO KLED Flashing Signal Light” is close, but the official site presents the code first and treats KIARO as the product family rather than the full commercial name. So for catalog accuracy, use CAME KIARO 001KLED KLED LED Flashing Light Signaller. (came.com)

Slug

came-kiaro-001kled-kled-led-flashing-light-signaller

Product Description

The CAME KIARO 001KLED is a low-consumption LED flashing light designed for automatic gate and barrier automation in Abu Dhabi. It provides a clear movement warning for pedestrians and vehicles while keeping power usage low during operation. Its ABS and polycarbonate body supports dependable outdoor use, and the IP54 rating helps protect the unit against dust and water splashes. With 120 to 230V AC input compatibility and compact dimensions, it is a practical safety accessory for residential entrances, commercial access points, and barrier-controlled vehicle entry systems. (came.com)

Key Features and Technical Specifications

The following specifications are taken from CAME’s official KIARO product pages and installation manual. (came.com)

• Official code: 001KLED
• Product designation: KLED
• Product family: KIARO
• Type: LED flashing light signaller
• Power supply: 120-230V AC, 50/60 Hz
• Power consumption: 2W at 230V AC and 1W at 120V AC
• Protection rating: IP54
• Operating temperature: -20°C to +55°C
• Material: ABS – Polycarbonate
• Approximate dimensions: 170 × 130 × 76 mm
• Intermittence: 50%
• Compatible accessory base: 001KIAROS wall-fastening base
• Compatible antenna accessories: 001TOP-A433N, 001TOP-A862N, 001TOP-RG58

Main Benefits for the Customer

This flashing light improves automation safety by creating a visible operating alert whenever the gate or barrier is moving. That helps reduce accidental crossing by pedestrians and improves awareness for incoming and outgoing vehicles. Its low-consumption LED system supports energy-efficient performance, which is useful for properties running automated access every day. The durable ABS-polycarbonate housing and IP54 protection also make it a strong fit for outdoor installations in Abu Dhabi, where reliable enclosure performance matters for long-term gate signaling and reduced maintenance interruptions. (came.com)

Use Cases

The 001KLED is suitable for automatic sliding gates, swing gates, parking barriers, and controlled vehicle entrances that need a visible motion warning. It works well for villas, commercial compounds, warehouses, office entrances, and shared access areas where traffic movement needs better signaling. It is also a good option for projects using CAME automation systems that require a matching branded warning accessory. Because it supports 120 to 230V AC operation, it fits installations where stable mains-powered signaling is preferred over lower-voltage flashing light alternatives. (came.com)

Compatibility and Installation Notes

The installation notes below are aligned with CAME’s official manual and product pages. (Came)

• Compatible with CAME automation and gearmotor systems using 120-230V AC flashing-light output.
• Suitable for sliding gate operators, swing gate motors, and barrier systems that require a visible movement alert.
• IP54 enclosure supports outdoor installation where splash and dust resistance are needed.
• The manual shows the light base fixed to a post using suitable dowels and screws.
• If wall mounting is required, the KIAROS wall-fastening base is optional and referenced separately by CAME.
• External antenna models TOP-A433N and TOP-A862N are supported, but the antenna is not included.
• CAME also states that a 630 mA safety fuse should be fitted if one is not already supplied on the automation.
• For mounting and wiring details, review the official installation manual.

Packing Includes

What is supplied or separately referenced in CAME’s documentation is listed below. (Came)

Buy Now

Improve gate safety in Abu Dhabi with genuine CAME LED warning performance built for dependable automated access signaling. Call/WhatsApp: +971 54 482 5472

230V AC LED signaller, 2W consumption, IP54-rated ABS-polycarbonate housing, -20°C to +55°C operation, for gate, barrier and access automation. (came.com)

Total word count excluding short description: 602