Nice MC800 control board for Swing Gate motor

Description

Exact product name available on branded site: MC800 — officially described by NICE as an electronic control unit and identified as a control unit with 2 motors 230V.

MC800

Slug: nice-mc800-control-unit

Product Description

The NICE MC800 is an electronic control unit developed for swing gate automation systems using one or two 120/230V gearmotors. In an automatic gate setup, this board manages command logic, motor outputs, safety-device monitoring, accessory control, and self-learning functions from one central platform. It is a critical replacement component because it restores stable gate movement, keeps connected safety devices and control inputs coordinated, and supports accurate programming of slowdown, partial opening, and operating behaviour without replacing the complete automation system.

Key Features and Technical Specifications

• Board type: electronic control unit
• Official product type: control unit with 2 motors 230V
• Application: swing gate automation
• Supports 1 or 2 gearmotors
• Compatible motor voltage: 120/230V, 50/60 Hz
• Works with or without limit switches
• Requires integrated thermal cut-off motors
• MC800 power supply: 120/230V, 50/60 Hz
• Nominal power absorbed: 900 W
• Warning light output: 120/230V, 21 W
• Electric lock output: 12 Va, max 15 VA
• Gate open indicator output: 24 V, max 4 W
• BLUEBUS output supported
• Supports up to 15 Bluebus units
• STOP input: NO, NC, or 8.2 kΩ contacts
• Step-by-step input supported
• OPEN input supported
• CLOSE input supported
• SM connector for radio receivers
• 50 Ω radio antenna input
• 8 ON-OFF programmable functions
• 8 adjustable functions
• Self-learning of Bluebus devices
• Self-learning of STOP input device type
• Self-learning of gate path
• Automatic slowdown calculation
• Partial opening point calculation
• Operating temperature: -20°C to +55°C
• Protection rating: IP54 with container intact
• Sensitive edges required in automation setup

Main Benefits for the Customer

• Restores stable swing gate operation
• Supports reliable command management
• Simplifies damaged board replacement
• Supports accessories and safety devices
• Improves smooth automation control
• Helps manage one or two motors efficiently
• Supports accurate partial opening control
• Reduces full system replacement cost

Use Cases

• Residential swing gate systems
• Commercial swing gate entrances
• Replacement of damaged control boards
• Upgrade of old gate control systems
• Single-leaf swing gate automation
• Double-leaf swing gate automation
• Installations needing Bluebus accessory support
• Systems requiring electric lock control

Compatibility and Installation Notes

• Designed for swing gate automation only
• Supports 1 or 2 gearmotors
• Officially for 120/230V 50/60 Hz gearmotors
• Motors must have integrated thermal cut-off
• Can be used with or without limit switches
• Sensitive edges are required in the system
• Supports Bluebus devices and SM plug-in receivers
• Supports STOP, OPEN, CLOSE, and step-by-step commands
• WG4000 and WG5000 compatibility is not clearly confirmed on the current branded source
• Installation and programming should be done by a qualified technician
• For complete setup details, review the technical manual

Packing Includes

Restore Automation Reliability

Call/WhatsApp: +971 54 482 5472 for genuine NICE MC800 replacement support in Abu Dhabi.

Total Number of Words: 415

NICE MC800 electronic control unit for 1 or 2 swing gate gearmotors, with 120/230V supply, Bluebus support, SM receiver connector, self-learning logic, partial opening, and IP54 protection.