RIB L1 CRX Sliding Gate Motor Control board

Description

Exact product name available on branded site: L1-CRX — officially presented by RIB as a control board / PC board for one sliding gate operator.

RIB L1-CRX

Slug: rib-l1-crx-control-board

Product Description

The RIB L1-CRX is a control board developed for one sliding gate operator in the RIB heavy-duty range. In an automatic gate system, it works as the electronic command centre, managing motor operation, limit-switch learning, safety inputs, accessory outputs, and radio-control functions from a single board. For buyers in Abu Dhabi looking for a replacement gate controller board, it is important because it restores stable command logic, supports smooth gate approach settings, and keeps the existing automation system working without replacing the full operator.

Key Features and Technical Specifications

• Board type: control board / PC board
• Application: suitable for 1 operator
• Power voltage: 230V ±10%, 50/60Hz
• 120V / 60Hz version available on request
• Maximum board absorption: 30 mA
• Blinker output: 40 W max resistive load
• Gate open warning output: 24 Vdc, 3 W max
• Accessories and photocells supply: 24 Vdc, 400 mA
• Radio connector supply: 24 Vdc, 200 mA
• Motor handling capacity: up to 700 W max
• Inputs: open, close, stop, timer, single command, pedestrian
• Safety inputs: photocell 1, photocell 2, edge 1, edge 2
• Encoder input supported
• Limit switch connections supported
• Automatic travel and operating-time learning
• Automatic closure for total and pedestrian opening
• Pre-blinking function
• High-speed adjustment
• Low-speed approach adjustment
• Soft start and soft stop
• Directional open and close commands with timer control
• Built-in 433.92 MHz radio module
• Radio memory capacity: 1,000 SUN or SUN PRO codes
• Built-in motor heater support with optional probe
• Impact sensor support with Set PLUS
• Safety-edge self-test as required by EN 12453:2022
• Operating humidity: below 95% without condensation
• Protection rating: IP55 when supplied in plastic container version

Main Benefits for the Customer

• Restores stable sliding gate operation
• Supports reliable command management
• Simplifies replacement of damaged electronics
• Helps retain the existing operator setup
• Supports photocells, safety strips, and key selectors
• Improves approach control and gate movement
• Integrates radio control on CRX version
• Reduces full motor replacement cost

Use Cases

• Residential sliding gates
• Commercial sliding gate entrances
• Industrial sliding gate systems
• Replacement of damaged control boards
• Upgrade of old gate control systems
• Service repair for heavy-duty gate operators
• Sites requiring pedestrian opening control

Compatibility and Installation Notes

• Suitable for one sliding gate operator
• Officially listed for K800, K1100, K1400, and K2200
• Officially listed for SUPER 2200 and SUPER 8000 INV
• Connectable to photocells, safety strips, blinker, and key selector
• APP and APP+ cards can be connected
• Radio, safety, and command inputs must be wired as clean contacts
• Voltage and motor rating must be checked before replacement
• Installation and programming should be completed by a qualified technician
• The drafted K400, K500, SUPER 3600, SUPER 4000, and SUPER 6000 references are not confirmed for L1-CRX on the current branded source
• For complete factory configuration details, review the official documentation

Packing Includes

Restore Sliding Gate Control

Call/WhatsApp: +971 54 482 5472 for genuine RIB L1-CRX replacement support in Abu Dhabi.

Total Number of Words: 530

RIB L1-CRX control board for one sliding gate operator, with 230V supply, 433.92 MHz radio, 700W motor handling, safety inputs, soft start-stop, and automatic travel learning.