SOMFY CB 230 RTS Swing Gate Control Board

Description

Exact product name available on branded site: CB 230 RTS. Official Somfy materials identify ref. 1841212 as the CB 230 RTS control board/control box for Ixengo 230 V swing gate systems. (service.somfy.com)

CB 230 RTS

Slug: somfy-cb-230-rts-control-board

Product Description

The Somfy CB 230 RTS is a control board designed to command one or two 230V Somfy swing gate motors in opening and closing cycles. In an automatic gate system, it functions as the central electronic module that manages motor output, radio commands, safety-device monitoring, automatic closing logic, and accessory connections from one enclosure. For buyers in Abu Dhabi looking for a replacement gate controller board, it is a practical solution for restoring stable automation control, reliable leaf coordination, and programmable system behaviour without replacing the full actuator set. (service.somfy.com)

Key Features and Technical Specifications

• Board type: control board / control box
• Official reference: 1841212
• Designed for one or two 230V Somfy motors
• Application: swing gate opening and closing
• Mains power supply: 220–230 V, 50–60 Hz
• Accessory power supply: 24 Vac / 360 mA
• Lighting output: 230 V, max. 60 W
• Built-in RTS radio control function
• RTS radio frequency: 433.42 MHz
• Remote memory capacity: up to 36 channels
• Programming interface: 2 buttons
• Advanced settings: 12 DIP switches
• Fine adjustment: 1 trimmer
• Status indication: 7 LEDs
• Torque setting for motor 1 and motor 2
• One-motor or two-motor configuration selection
• Leaf offset adjustment on closing
• Operating mode selection via DIP switches
• Orange light pre-warning function
• Photocell auto-test on closing
• Automatic closing delay adjustment
• Radio memorisation and erase function
• Supports resistive safety edge 8.2 kΩ
• IP44 protection rating
• Operating temperature: -20°C to +60°C

These specifications are taken from official Somfy product and installation materials. (service.somfy.com)

Main Benefits for the Customer

• Restores stable swing gate operation
• Supports reliable command management
• Simplifies replacement of damaged electronics
• Helps coordinate one or two gate leaves
• Supports safety and accessory integration
• Improves programmable automation control
• Reduces full motor replacement cost
• Helps speed up maintenance work

These customer benefits follow directly from the verified control, radio, safety, and programming functions published by Somfy. (service.somfy.com)

Use Cases

• Residential swing gate systems
• Commercial swing gate entrances
• Replacement of damaged control boards
• Upgrade of older gate control systems
• One-leaf swing gate automation
• Two-leaf swing gate automation
• Sites using photocells and safety edges
• Systems requiring RTS radio control

These use cases align with Somfy’s stated application for one or two 230V swing gate motors. (service.somfy.com)

Compatibility and Installation Notes

• Officially intended for one or two 230V Somfy motors
• Compatible motor families shown by Somfy: Ixengo L 230 V and Ixengo S 230 V
• Supports RTS radio-control operation
• Supports photocell safety management
• Supports 8.2 kΩ resistive safety edge input
• Electric lock is recommended in the Ixengo L setup for leaves above 2 m
• Maximum authorised cable length from control box to motors: 20 m
• Automatic mode requires photocells to be installed
• Installation and programming should be completed by a qualified technician
• For factory verification, review the official documentation

Compatibility and installation notes above are limited to details clearly stated in Somfy’s official materials. (service.somfy.com)

Packing Includes

The official installation manual shows the enclosure, electronic board, terminal block, and spare fuses, but does not clearly publish a full retail packing list. (service.somfy.com)

Restore Reliable Gate Control

Call/WhatsApp: +971 54 482 5472 for genuine Somfy CB 230 RTS replacement support in Abu Dhabi.

Total Number of Words: 485

Somfy CB 230 RTS control board for one or two 230V swing gate motors, with 433.42 MHz RTS radio, 12 DIP settings, 7 LED diagnostics, 24 Vac accessory output, and IP44 protection.