POWERgate Abu Dhabi logo with stylized open gates, lightning bolt, wireless signal, and orange-black text branding.
Proteco RF40 infrared gate photocell sensor set shown with closed and open black housings.
✓ 100% Genuine Brand Product
★ 1 Year Warranty
➤ UAE Wide Delivery
⚙ Technical Support

Proteco RF40 Photocell Sensors

Proteco RF40 photocell set with 40m infrared range, 12–24Vac/dc power supply, slimline wall/post mounting case and sunlight protection for gate safety systems.

AED 280

Product price:AED 280
Total options:
Order total:
- +
Category: Tags: , , , Brand:

Product Overview

Proteco RF40 Photocell Sensors are safety infrared photocells for automatic gate motor systems in Abu Dhabi. They are designed for RF12 post mounting or wall mounting, making them suitable for different gate automation layouts. The RF40 set has a slimline case, 40 m operating range, sunlight protection screen, and 12–24Vac/dc power supply. These photocells help improve gate safety by detecting obstacles across the gate movement area. They are suitable for residential, commercial, and parking access automation where reliable infrared beam detection is required.

Key Features and Technical Specifications

  • Brand: Proteco
  • Model: RF40
  • Product type: Safety infrared photocells set
  • Installation type: RF12 post mounting or wall mounting
  • Case design: Slimline case
  • Operating range: 40 m
  • Power supply: 12–24Vac/dc
  • Sunlight protection screen: Yes
  • Application: Automatic gate motor safety detection
  • Protection rating: Not specified by manufacturer
  • Dimensions: Not specified by manufacturer
  • Operating temperature: Not specified by manufacturer
  • Relay output/contact rating: Not specified by manufacturer

Use Cases

  • Residential automatic gates
  • Villa sliding gate systems
  • Swing gate automation
  • Commercial gate entrances
  • Parking access control points
  • Warehouse gate automation
  • Industrial gate safety systems where compatible photocells are required
  • Replacement of damaged or weak gate photocell sensors

Compatibility and Installation Notes

Proteco RF40 photocells should be installed on a compatible automatic gate system that supports 12–24Vac/dc safety photocell inputs. The transmitter and receiver must face each other correctly, and the beam path must remain clear for reliable obstacle detection. Professional installation is recommended because wiring, beam alignment, control board connection, and final safety testing must be done properly. For technical checking before installation, review the official Proteco RF40 product page.

Packing Includes

  • Proteco RF40 safety infrared photocells set — Quantity: 1 set

Why Buy from POWERgate Abu Dhabi

POWERgate Abu Dhabi supplies automation safety accessories with local support for customers who need correct photocell selection, installation guidance, and reliable after-sales help. You get practical Abu Dhabi-based support for gate automation parts instead of risking mismatched safety sensors.

Buy Proteco RF40 Photocell Sensors today from PowerGate Abu Dhabi. Call/WhatsApp: +971 50 884 4933 or email us: sales@powergatead.com.

 

Reviews

There are no reviews yet.

Be the first to review “Proteco RF40 Photocell Sensors”

Your email address will not be published. Required fields are marked *

The Proteco RF40 includes a sunlight protection screen, a shield intended to limit direct sun reaching the receiver lens, which matters in Abu Dhabi where low sunrise or sunset light can cause false stops. Aim the receiver away from the sun’s path as well, because the screen reduces the problem but does not remove it.

The Proteco RF40 has a 40 m operating range, suiting wide commercial entrances, but most villa gates need far less. Confirm it gives margin over your opening width, and keep the beam path clear of leaves, sprinkler spray, and parked vehicles in Abu Dhabi, since any obstruction on a safety beam stops the gate.

The Proteco RF40 is designed for RF12 post mounting or wall mounting. The pack lists one RF40 set only, so the RF12 post is not included. For a free-standing install away from a wall, ask POWERgate Abu Dhabi about the RF12 post first; for a pillar or wall, the slimline case mounts directly.

The Proteco RF40 runs on 12–24Vac/dc, but the listing gives no relay contact rating, so confirm your board’s photocell input before ordering. A Proteco board such as the Proteco Q80S is the natural pairing to check; send its model and wiring to POWERgate Abu Dhabi and we will confirm the match.

At AED 280, the Proteco RF40 supplies one set of transmitter and receiver. The listing leaves out the IP rating, dimensions, operating temperature, and relay rating, so ask POWERgate Abu Dhabi on WhatsApp +971 50 884 4933 for the manufacturer’s data and a compatibility check before you fit it outdoors in Abu Dhabi heat.

Related products

Shopping Cart