CAME AXO AX302304 Swing Gate Motor

The AXO AX302304 is unique in the CAME range at POWERgate Abu Dhabi as the first 230V AC motor with an integrated encoder. The CAME ATI and ATS motors are 230V but have no encoder (they use work-time limits or mechanical stops). The CAME AXI and AXL motors have an encoder but run on 24V DC. The AXO combines both: 230V mains power for high thrust (500–4500N) without a step-down transformer, and encoder-based position control for precise slow-down, dynamic obstacle detection, and adjustable partial opening. This makes the AXO the most technically complete CAME surface swing gate motor in the range — suited to Abu Dhabi installations that need heavy-gate 230V power and intelligent encoder precision in the same operator.

Yes. The CAME AXO AX302304’s maximum thrust of 4500N is the highest of any surface-mounted swing gate motor at POWERgate Abu Dhabi — 500N more than the CAME ATI A3000 and A5000 (4000N), and substantially higher than the BFT KUSTOS BT B40 and PHOBOS BT B40 (both around 700 kg rated without specifying N). At its minimum setting of 500N (higher than most motors’ minimum of 400N), the AXO AX302304 still applies firm force even at low adjustment — reflecting its design for heavier gates. The encoder monitors actual motor load against expected load at each position, allowing the full thrust range to be applied intelligently rather than at constant maximum, protecting both the gate and the gearmotor from unnecessary mechanical stress.

The CAME AXO AX302304’s ability to move an 800 kg gate leaf at 175W is a result of its high-reduction worm gear within the die-cast aluminium AXO housing, which converts the motor’s fast low-torque rotation into slow high-force linear movement. At 2.0m leaf length, the lever arm geometry means the force required at the actuator bracket to rotate the 800 kg leaf around the hinge is significantly less than the gate’s static weight suggests — the hinge bears the vertical load while the motor only overcomes horizontal inertia and friction. The encoder’s progressive power management via the compatible CAME control panel (801QA-0120 or 801QA-0130) ramps thrust at startup and adjusts throughout the 20-second cycle. The result is a motor that consumes less power than the CAME ATI A5000 (260W for 400 kg) while handling a gate twice as heavy.

CAME officially lists the CAME 801QA-0120 and CAME 801QA-0130 as the compatible control panels for the AXO AX302304. These are CAME’s dedicated two-leaf swing gate control boards matched to the AXO’s 230V supply, encoder wiring, and high-thrust operation. The AXO AX302304 is the only motor in the POWERgate Abu Dhabi range to publish specific compatible control panel product codes, giving installers clear guidance on which boards to specify. Using a non-listed control panel risks incompatibility with the encoder signal protocol or insufficient current handling for the AXO’s 1.5A/175W draw. POWERgate Abu Dhabi can supply both the AXO AX302304 motor and the correct CAME control panel — contact us on WhatsApp (+971 50 884 4933) to confirm current availability of compatible control panels.

The CAME AXO AX302304 carries a 24-month manufacturer warranty from purchase, backed by CAME’s EN-tested engineering standard. Three installation factors are critical for warranty compliance. First, the variable capacity limits must be observed: running a 700 kg gate leaf at 3.0m exceeds the 500 kg limit at that length and will cause premature encoder overload alerts and mechanical wear. Second, only compatible control panels 801QA-0120 or 801QA-0130 should be connected; an incorrect panel cannot correctly decode the encoder signal or manage the 4500N thrust range. Third, the adjustable mechanical limit switches must be correctly set alongside the encoder limits as a physical safety backup — missing this step means the gate relies on encoder limits alone with no mechanical failsafe. The IP44 rating applies and requires sheltered installation. POWERgate Abu Dhabi handles all warranty claims — contact us on WhatsApp (+971 50 884 4933) or at sales@powergatead.com.