✓ 100% Genuine Brand Product
★ 1 Year Warranty
➤ UAE Wide Delivery
⚙ Technical Support

CAME KRONO KR310 Swing Gate Motor Kit

230V electromechanical swing gate gearmotor for leaves up to 3m and 400kg, with IP54 protection, 130W power, 400–3000N thrust, 22s opening time and adjustable micro-switches.

 

 

AED 2,875

Product price:AED 2,875
Total options:
Order total:
- +

Product Overview

CAME KRONO Swing Gate Motor is a 230V electromechanical automation solution for swing gates in Abu Dhabi. Based on the official CAME KRONO range, the KR310 right and left gearmotors are suitable for gate leaves up to 3 m long and up to 400 kg in weight. The system is designed with a strong die-cast aluminium supporting structure, adjustable opening and closing micro-switches, and an integrated emergency release lever. With IP54 protection, 30% duty cycle, and 400–3000 N thrust, it is suitable for reliable residential and light commercial gate automation.

Key Features and Technical Specifications

  • Brand: CAME
  • Product range: KRONO
  • Suitable official models for 3 m / 400 kg leaves: KR310D right gearmotor and KR310S left gearmotor
  • Operator type: 230V electromechanical swing gate gearmotor
  • Maximum leaf length: Up to 3 m
  • Maximum leaf weight: Up to 400 kg
  • Supporting structure: Die-cast aluminium
  • Limit switches: Adjustable opening and closing micro-switches
  • Emergency release: Built-in emergency release lever
  • Protection rating: IP54
  • Power supply: 230V AC, 50/60 Hz
  • Motor power supply: 230V AC, 50/60 Hz
  • Current draw: 1.1 A
  • Power: 130 W
  • Duty cycle: 30%
  • Thrust / traction force: 400–3000 N
  • Opening time at 90°: 22 seconds
  • Operating temperature: -20 °C to +55 °C
  • Maximum opening angle: 120°
  • Motor thermal protection: 150 °C
  • Country of manufacture: Not specified by manufacturer

Use Cases

Compatibility and Installation Notes

CAME KRONO Swing Gate Motor is suitable for swing gate leaves up to 3 m and 400 kg when using the compatible KR310 right and left gearmotors from the KRONO range. Installation must be checked according to gate weight, leaf length, hinge position, pillar structure, bracket alignment, opening angle, control board selection, photocell placement, and electrical safety requirements. Professional installation is recommended because correct motor geometry, micro-switch adjustment, mechanical stop positioning, release setup, and safety testing are essential for smooth and safe gate operation. For more technical product details, review the official CAME KRONO product information.

Why Buy from POWERgate Abu Dhabi

POWERgate Abu Dhabi provides local automation product support, professional guidance, and reliable assistance for choosing the correct swing gate motor for your entrance. We help customers select suitable CAME automation products and compatible accessories for safe, smooth, and long-lasting operation.

Buy CAME KRONO today from POWERgate abu dhabi. Call/WhatsApp: +971 50 884 4933 or email us: sales@powergatead.com.

 

Reviews

There are no reviews yet.

Be the first to review “CAME KRONO KR310 Swing Gate Motor Kit”

Your email address will not be published. Required fields are marked *

The CAME KRONO KR310 and CAME KRONO KR300D are both 230V irreversible gearmotors for 3.0m/400kg swing gates with IP54 protection, 400–3000N thrust, 22-second 90° cycle, 120° opening, and a built-in emergency release lever. The critical differences: the KR310 uses 130W at 1.1A (versus the KR300D’s 240W), carries a 30% duty cycle (versus the KR300D’s 16 cycles per hour rating), and includes adjustable opening AND closing microswitches (whereas the KR300D has no limit-switch microswitch). The KR310 listing also covers both the KR310D right and KR310S left gearmotors, while the KR300D is the right-side unit only. For a standard double-leaf gate, the KR310 pairing (KR310D + KR310S) gives the installer both sides with matched specifications. The KR300D’s 240W makes it better suited to heavier cycling demands despite the 110W higher consumption.

The CAME KRONO KR310 includes adjustable opening and closing microswitches — dedicated sensors that detect when the gate has reached both its fully open and fully closed positions. When the opening microswitch triggers, the control panel knows the gate is at the correct open position and can stop the motor precisely regardless of run time. When the closing microswitch triggers, the gate is confirmed fully closed electronically rather than relying purely on the control panel’s timed run. This dual microswitch system is more reliable than the KR300D’s work-time-only approach: if gate friction increases over time (stiff hinges, dust accumulation, temperature effects) the KR310 still stops accurately at the physical switch position, while a work-time motor without switches may stop slightly short of or past the correct position. For Abu Dhabi gates where precise repeatable closure is required for access control or electric lock alignment, the KR310’s dual microswitch system is the more reliable specification.

The CAME KRONO KR310 consumes 130W at 1.1A versus the KR300D’s 240W at 1.1A — interestingly, both draw the same 1.1A current but at different power levels. This power difference is likely due to the KR310’s motor design being optimised for precision-controlled movement via the adjustable microswitches, allowing the motor to operate at lower sustained power because it stops reliably at exact positions rather than running through to a mechanical stop at full thrust. The 130W KR310 is also rated at 30% duty cycle (approximately 15–20 cycles per day), suitable for standard residential villa use. The KR300D’s higher 240W reflects a motor designed to sustain 16 cycles per hour at higher continuous power output without the microswitch position correction that KR310’s design relies on.

The CAME KRONO KR310’s 30% duty cycle means the motor should be operating for no more than 30% of any given time period — equating to approximately 15 to 20 complete open/close cycles per day at Abu Dhabi ambient temperatures. At a 22-second cycle to 90°, each full open/close sequence takes approximately 46 seconds, and the 30% rating means the motor requires a comparable rest period before the next cycle. For a typical Abu Dhabi family villa with moderate daily vehicle traffic, this is more than adequate. The 150°C thermal protection will engage if the 30% limit is regularly exceeded, protecting the motor winding but indicating an application mismatch that should be addressed by specifying a higher-duty motor.

The CAME KRONO KR310 range includes the KR310D right gearmotor and KR310S left gearmotor. The correct choice depends on which leaf of your double gate each motor will be installed on, viewed from outside the gate looking in: the right leaf takes the KR310D and the left leaf takes the KR310S. For a double-leaf swing gate opening inward (most common in Abu Dhabi villas), a complete installation requires one KR310D and one KR310S. When ordering from POWERgate Abu Dhabi, confirming your gate opening direction and hinge positions before placing the order ensures the correct motor arm direction on each leaf. Contact us on WhatsApp (+971 50 884 4933) with your gate layout and we will confirm the correct KR310D/KR310S pairing.

The CAME KRONO KR310 carries a 24-month manufacturer warranty from purchase. The adjustable opening and closing microswitches are the most maintenance-sensitive component: they must be correctly adjusted during commissioning so the gate stops precisely at the desired open and closed positions. If a microswitch drifts out of adjustment over time — due to bracket vibration, thermal expansion, or accumulation of dust on the switch actuator arm — the gate may stop fractionally short or past the correct position, causing either incomplete closure (security risk) or the motor to briefly drive against the mechanical stop (warranty-impacting stress). Annual microswitch inspection and adjustment are recommended. The IP54 rating protects the motor in Abu Dhabi’s outdoor environment, and the built-in release lever must only be operated when the motor is at rest. POWERgate Abu Dhabi handles all warranty claims locally — contact us on WhatsApp (+971 50 884 4933) or at sales@powergatead.com.

Shopping Cart