Product Overview
NICE M7BAR Gate Barrier is a 24V electromechanical boom gate designed for controlled vehicle access with clear openings from 5 to 7 metres. It is suitable for Abu Dhabi parking areas, office entrances, residential communities, villas, warehouses, and industrial access points where frequent operation and reliable movement control are required. The M7BAR includes an integrated electronic control unit, BlueBUS connectivity, adjustable manoeuvre time, metal detector inputs, and IP54-rated protection. The official Nice manual lists the M7BAR as a boom gate for residential use with an electronic control unit and a 5–7m clear opening range.
Key Features and Technical Specifications
- Product code: M7BAR
- Product type: Electromechanical boom gate with electronic control unit
- Clear opening: 5–7 metres
- Power supply: 230V AC, 50/60Hz
- Motor power supply: 24V DC
- Maximum power draw at peak: 110W
- Maximum power at nominal torque: 40W
- Start peak torque: 300Nm
- Nominal torque: 90Nm
- Manoeuvre time: adjustable 6–10 seconds
- Maximum operating cycles/hour at nominal torque: 200
- Emergency power supply: Optional PS224 accessory
- Photovoltaic power supply: Optional SYKCE accessory
- FLASH output: For LUCYB, MLB or MLBT warning light, 12V–21W
- LIGHT output: For XBA4 boom lights optional accessory
- OGI output: 24V, max 10W indicator light
- BLUEBUS output: Maximum load of 10 BlueBUS units
- STOP input: Normally closed, normally open, or 8.2kΩ resistor contact with self-learning
- Radio connector: SM connector for SMXI and SMXIS receivers
- Inputs for metal detectors: 2
- Operating temperature: -20°C to +55°C
- Protection rating: IP54
- Dimensions: 400 x 299 x 1215h mm
- Weight: 85kg
Use Cases
- Guarded parking lots
- Office building parking entrances
- University and institutional access points
- Residential community entrances
- Villa parking gates
- Warehouse vehicle entry points
- Commercial premises
- Industrial access-control lanes
Compatibility and Installation Notes
The NICE M7BAR is designed for Nice boom gate systems with 5–7 metre clear openings and should be matched with the correct boom, joint, rubber impact strip, reflector strips, warning light, photocells, and compatible Nice radio receiver accessories where required. Installation must be completed by a qualified technician because the barrier requires correct foundation anchoring, boom balancing, electrical wiring, safety device learning, limit-position setup, and final commissioning. For detailed installation and safety guidance, refer to the official Nice installation and warnings manual. Incorrect installation can reduce product life, cause unsafe operation, or damage the gearmotor and accessories.
Packing Includes
- 1 x 24V gearmotor with housing
- 1 x BCU1 control unit
- 1 x Mounting bracket for elliptical bar
- 1 x Anchors and base plate set
- Remote controls
- Flashing light
- Photocell sensor
- 1 x NICE M7BAR R10 electromechanical road barrier up to 7m
- 1 x NICE XBA15 white paint-finished aluminium bar, 3.15m
- 1 x NICE XBA9 expansion joint for XBA15/XBA14/XBA5
- 2 x NICE XBA13 rubber impact protection strips
- NICE WA10 red adhesive reflector strips
Why Buy from POWERgate Abu Dhabi
POWERgate Abu Dhabi supplies automation products with local support, practical product guidance, and assistance for access-control requirements in Abu Dhabi. Buyers get help choosing the correct barrier kit, compatible accessories, and installation approach for safe long-term operation.
Buy NICE M7BAR today from PowerGate abu dhabi. Call/WhatsApp: +971508844933 or email us: sales@powergatead.com.
Reviews
There are no reviews yet.