BEA MATRIX Single Channel Loop Detector

Product Overview

BEA MATRIX Loop Detector is a digital inductive single-channel vehicle detector designed for parking barrier control, motorized gates, doors, vehicle access control, and industrial control systems. For Abu Dhabi parking and gate automation sites, it helps detect vehicles through an installed ground loop and provides reliable presence detection for barrier opening, safety holding, or access control triggering. The BEA MATRIX range is available in single and dual-channel versions, with single-loop versions listed for 110–120 V AC and 12–24 V AC/DC power supply options. It uses automatic tuning, adjustable sensitivity, presence timing, and frequency settings to support stable vehicle detection.

Key Features and Technical Specifications

• Official product range: BEA MATRIX2 Digital Inductive Loop Sensors
• Product type: Single-channel inductive loop detector
• Single-loop model options: MATRIX2-S110 CUSTOM and MATRIX2-S12-24 CUSTOM
• Application: Parking barrier control, motorized gates and doors, vehicle access control, and industrial control systems
• Technology: Inductive loop
• Tuning: Automatic
• Detection mode: Presence
• Presence time: 1 minute to infinity, with 250 steps
• Pulse time output: 100 ms or 500 ms
• Inductance range: 20 µH to 1000 µH
• Frequency range: 20 kHz to 130 kHz
• Frequency steps: 4 for single loop
• Sensitivity: 0.005% to 0.5%, with 250 steps
• Reaction time: 25 ms for single loop
• Setup time at power on: 8 seconds maximum per channel
• Setup time after configuration: 2 seconds maximum per channel
• Power supply options, depending on model: 12–24 V AC/DC ±10%, 230 V AC ±10%, or 115 V AC ±10%
• Power frequency: 48 to 62 Hz
• Power consumption: < 2.5 W
• Temperature range: -30°C to +70°C
• Degree of protection: IP40
• Output relays: 2 free-potential change-over contact relays
• Maximum contact voltage: 230 V AC
• Maximum contact current: 5 A resistive
• LED indicators: 1 green power LED and red loop status LEDs
• Protection features: Loop insulation transformer, Zener diodes, and gas discharge clamping
• Connection: Standard 11-pin round connector 86CP11
• Dimensions: 77 mm × 40 mm × 75 mm
• Weight: < 200 g
• Automatic sensitivity boost: Available as ASB function in configuration settings
• Continuous temperature adjustment: Not specified by manufacturer

Use Cases

• Automatic parking barriers
• Parking entrance and exit lanes
• Residential gate automation
• Villa gate safety loops
• Commercial vehicle access control
• Industrial gates and barriers
• Motorized doors and shutters
• Warehouse vehicle entry points
• Long-presence vehicle detection applications

Compatibility and Installation Notes

The BEA MATRIX Loop Detector is compatible with automatic barriers, gate operators, motorized doors, and access control panels that accept relay contact input from an inductive loop detector. Installation requires a correctly cut ground loop, suitable loop cable, proper feeder twisting, waterproof cable junction protection, and correct wiring to the 11-pin socket. BEA states that power must be shut off before wiring and that traffic should be controlled during testing to prevent unexpected gate or barrier movement. Professional installation is recommended to set frequency, sensitivity, presence time, relay mode, and loop geometry correctly; review the official BEA MATRIX2 user guide before installation.

Packing Includes

• 1 × BEA MATRIX single-channel loop detector

Why Buy from POWERgate Abu Dhabi

POWERgate Abu Dhabi supplies reliable parking barrier and gate automation products with local support for access control projects. We help buyers confirm voltage, loop detector type, relay compatibility, and installation requirements before purchase.

Buy BEA MATRIX Loop Detector today from POWERgate abu dhabi. Call/WhatsApp: +971 50 88 44933 or email us: sales@powergatead.com.