Product Overview
NICE MC200 control board is an electronic control unit for rolling doors, shutters, overhead doors, sectional doors, and similar 230V automation systems in Abu Dhabi. It controls one motor and supports semi-automatic and automatic operation, safety input connection, flashing light output, and built-in radio receiver control. The board is suitable for replacement, repair, or maintenance where a compatible Nice rolling door or shutter automation system requires reliable control. With 433.92 MHz radio support and programmable inputs, it provides a practical PCB solution for residential, commercial, and access automation applications.
Key Features and Technical Specifications
- Brand: Nice
- Model: MC200
- Product type: Electronic control unit / control board
- Application: Motor control for shutter, overhead door, sectional door, rolling shutter, or similar automation
- Power supply: 120V to 230V, 50/60 Hz
- Maximum motor power: 450W at 120V
- Maximum motor power: 950W at 230V
- Control signal voltage: Approximately 24V
- Device output terminals 8–9: Approximately 24V, maximum 100mA
- Safety input: Supports 8.2 kΩ resistive safety edge configuration
- Built-in radio receiver: Available
- Radio frequency: 433.92 MHz
- Radio coding: FLOR, O-CODE, SMILO
- Operating temperature: -20°C to +55°C
- Dimensions: 127 x 111 x 45 mm
- Weight: 300 g
- IP rating: IP44
- Operating modes: Semi-automatic and automatic operation
- Flashing output: Available
- Programmable inputs: Available according to installation setup
- O-View / Opera compatibility: Supported through compatible Nice interface setup
Use Cases
- Rolling door automation control
- Rolling shutter control systems
- Garage rolling door repair
- Commercial shutter automation
- Warehouse shutter control
- Sectional door control where compatible
- Overhead door automation where compatible
- Replacement PCB for compatible Nice automation systems
- Access automation maintenance in Abu Dhabi
Compatibility and Installation Notes
NICE MC200 control board is designed for controlling one compatible motor used in rolling shutters, shutters, overhead doors, sectional doors, and similar automation applications. It should only be installed where the motor power, safety input, accessory wiring, and operating logic match the manufacturer’s technical limits. Professional installation is strongly recommended because mains voltage wiring, motor output, flashing light output, safety edge input, radio programming, and automation testing must be handled correctly. For setup details, review the official Nice MC200 installation manual.
Packing Includes
- 1 x NICE MC200 control board
Why Buy from POWERgate Abu Dhabi
POWERgate Abu Dhabi supplies gate control boards with local compatibility support, replacement guidance, and automation assistance. Buyers get help confirming whether the NICE MC200 matches their rolling door, shutter, or garage automation system before ordering.
Buy NICE MC200 today from POWERgate abu dhabi. Call/WhatsApp: +971 508844933 or email us: sales@powergatead.com.
Reviews
There are no reviews yet.