POWERgate Abu Dhabi logo with stylized open gates, lightning bolt, wireless signal, and orange-black text branding.
Pair of black MOTORLINE MF30 infrared photocell sensors for wired automatic gate, barrier, and garage door safety.
✓ 100% Genuine Brand Product
★ 1 Year Warranty
➤ UAE Wide Delivery
⚙ Technical Support

MOTORLINE MF30 Photocell Sensors

Wired modulated infrared photocell kit for automation safety, with 25 m range, 12–24Vac / 12–24–36Vdc input, 940nm wavelength, NC/NO contact selection and 30Vdc 1A relay output.

 

AED 290

Product price:AED 290
Total options:
Order total:
- +
Category: Tags: , , , Brand:

Product Overview

MOTORLINE MF30 Photocell Sensors are modulated infrared safety photocells for automatic gate and door automation systems in Abu Dhabi. The official MOTORLINE MF30 kit has a nominal detection range of 25 meters and works as a transmitter and receiver photocell pair for obstacle detection. It is designed to improve automation safety by sending a signal to the control board when the infrared beam is interrupted. These photocells are suitable for professional gate, barrier, and garage door automation installations where reliable wired safety detection is required. (motorline.pt)

Key Features and Technical Specifications

  • Brand: MOTORLINE
  • Product model: MF30
  • Product type: Modulated infrared photocell kit
  • Installation type: Wired photocells
  • Maximum distance / nominal range: 25 m
  • Input voltage: 12Vac–24Vac / 12Vdc–24Vdc–36Vdc
  • Standby current: RX 30mA / TX 30mA
  • Rated current: RX/TX 60mA
  • Frequency: 50–60Hz
  • Working temperature: -25°C to +70°C
  • Infrared wavelength: 940nm
  • Isolation class: Class 3
  • Relay output switching capacity: 30Vdc, 1A
  • Recommended installation height: 500 mm
  • Dimensions shown in manual: 41 mm × 100 mm
  • Contact selection: NC/NO jumper selection
  • IP rating: Not specified by manufacturer

Use Cases

  • Residential automatic gates
  • Villa sliding gate automation
  • Swing gate safety systems
  • Garage door automation
  • Parking barrier safety detection
  • Commercial gate entrances
  • Warehouse access automation
  • Automatic door and gate motor safety circuits where compatible

Compatibility and Installation Notes

The MOTORLINE MF30 Photocell Sensors should be used with compatible automation control boards that support photocell safety inputs and the required low-voltage power supply. The transmitter and receiver must be mounted facing each other, aligned correctly, and installed at the recommended height for reliable obstacle detection. For more setup guidance, review the official MF30 user and installer manual. Professional installation is recommended to ensure correct wiring, NC/NO contact selection, alignment, and safe gate operation in Abu Dhabi automation systems.

Packing Includes

  • 1 × MOTORLINE MF30 transmitter photocell
  • 1 × MOTORLINE MF30 receiver photocell

Why Buy from PowerGate Abu Dhabi

PowerGate Abu Dhabi supplies reliable gate automation accessories with local support, product guidance, and after-sales assistance for customers in Abu Dhabi. We help buyers select the correct photocell sensors for their automation system and support proper compatibility before installation.

Buy MOTORLINE MF30 today from PowerGate Abu Dhabi. Call/WhatsApp: +971 50 884 4933 or email us: sales@powergatead.com.

 

Reviews

There are no reviews yet.

Be the first to review “MOTORLINE MF30 Photocell Sensors”

Your email address will not be published. Required fields are marked *

The MOTORLINE MF30 works from -25°C to +70°C, a higher ceiling than the +55°C of several photocells we list, which helps in a sun-baked Abu Dhabi pillar. The listing gives no IP rating, so still shade both units, seal cable entries, and ask POWERgate Abu Dhabi for the manufacturer’s protection data.

The MOTORLINE MF30 lists a recommended installation height of 500 mm. Mount both units at that height, facing each other and level, so the beam catches low obstacles such as bicycles or small children, and re-check alignment after any pillar work, because a shifted bracket lets the beam miss its receiver.

The MOTORLINE MF30 has an NC/NO jumper and a relay rated 30Vdc, 1A. Set the jumper to your board’s required contact logic, for example on a Motorline gate such as the MOTORLINE BRAVO500, and confirm the exact setting with POWERgate Abu Dhabi, because a wrong jumper can leave the gate ignoring the beam.

The MOTORLINE MF30 accepts 12–24Vac or 12–36Vdc, with a listed standby current of 30 mA each for transmitter and receiver and a rated current of 60 mA. Add those figures to your board’s other accessories, and confirm the board’s accessory supply is within the listed voltages before connecting a pair.

At AED 290, the MOTORLINE MF30 supplies one wired transmitter and receiver pair with a nominal 25 m range, 940nm modulated infrared, and a Class 3 isolation rating. Contact POWERgate Abu Dhabi on WhatsApp +971 50 884 4933 with your board model to confirm compatibility before ordering.

Related products

Shopping Cart