Nice Wingo 4 Swing Gate Motor Kit

Product Overview

Nice Wingo 4 Swing Gate Motor is a 230V electromechanical linear operator for residential swing gates in Abu Dhabi. The WG4000 model is designed for swing gate leaves up to 2 m, with manufacturer kit references listing use up to 400 kg per leaf depending on gate conditions. Its surface-mounted body, manual release system, external control unit operation, and compact 770 x 98 x 95 mm actuator design make it suitable for villa and private entrance automation. Nice’s official Wingo manual confirms the product is intended for residential swing gate or door automation and requires correct model selection before installation.

Key Features and Technical Specifications

• Brand: Nice
• Product range: Wingo
• Main model: WG4000
• Product type: Electromechanical gear motor for swing gates
• Gate leaf length: Up to 2 m
• Gate leaf weight: Up to 400 kg, subject to the manufacturer’s application limits
• Power input: 230V~ 50Hz
• Maximum absorption: 1.5A
• Nominal absorption: 0.5A
• Maximum absorbed power: 200W
• Nominal absorbed power: 130W
• Protection grade: IP44
• Travel: 320 mm
• Speed loadless: 0.016 m/s
• Maximum thrust: 1500N
• Nominal thrust: 500N
• Operating temperature: -20°C to +50°C
• Cycles/hour at nominal torque: 30
• Estimated durability: 80,000 to 250,000 manoeuvre cycles depending on installation conditions
• Insulation class: F
• Dimensions: 770 x 98 x 95 mm
• Weight: 6 kg
• Manual release: Yes, with release keys
• Compatible control unit: MC800 for 230V swing gate motors
• OXI/OXIBD receiver compatibility: Supported with MC800-based Nice systems
• ON2E remote controls in supplied rough kit: Not specified by manufacturer for current official WINGO4BDKCE kit references
• Phototest, pedestrian opening, and electromechanical lock connection: Not specified by manufacturer in the WG4000 motor manual

Use Cases

• Residential swing gates in Abu Dhabi
• Villa entrance gates
• Private double-leaf swing gates
• Light residential parking entrances
• Hinged gate automation for leaves up to 2 m
• Gate automation where surface-mounted linear motors are suitable
• Commercial gates: Not specified by manufacturer for this model

Compatibility and Installation Notes

Nice Wingo 4 Swing Gate Motor must be installed only on a mechanically safe and efficient swing gate structure. The installer should check leaf length, leaf weight, hinge condition, gate balance, opening angle, fixing surfaces, wiring, manual-release access, and safety devices before commissioning. Nice states that installation, testing, connection, and maintenance operations must be carried out by qualified technicians, and the final automation should be tested according to applicable safety requirements. For correct installation dimensions and safety instructions, refer to the official Nice Wingo instruction manual. Professional installation is strongly recommended for reliable operation in Abu Dhabi.

Packing Includes

• 2 x Nice WG4000 surface-mounted electromechanical gear motors
• 1 x MC800 control unit
• 1 x EPM pair of photocells
• 1 x ELAC flashing light with antenna
• 1 x OXIBD receiver, as specified in current official WINGO4BDKCE kit references
• 2 x Nice transmitters, model varies by regional kit reference
• Front bracket for gear motor fixing
• Rear bracket and plate for wall fixing
• Metal fixing parts, screws, and washers
• Manual release keys

Why Buy from POWERgate Abu Dhabi

POWERgate Abu Dhabi supplies reliable swing gate automation products with local Abu Dhabi support, product selection guidance, and installation-focused assistance. We help customers choose the correct gate motor according to gate size, weight, hinge condition, and daily usage needs.

Buy Wingo 4 today from POWERgate Abu Dhabi. Call/WhatsApp: +971 50 884 4933 or email us: sales@powergatead.com.